Read/write Speeds

User discussion forum for prior versions of DAVE
Forum rules
This forum is for user discussion of DAVE, and is not intended as a source of technical assistance.
Please note that only the most basic installation or configuration support will be offered by Support Specialists for legacy versions.

Read/write Speeds

Postby robs » Thu Jan 24, 2013 8:32 pm

Hi

I have a Mac OS X Lion Mac Pro acting as and SMB server. On the Mac Pro server I have a custom SMB application. I can connect without Dave using OSX's 'Connect to server' function. I get approx 50MB/s read and 50MB/s write. I loaded Dave to get better performance with our video editing server and generally it does that. The SMB drives load instantly, however the read/write speeds are 75MB/s read and 22MB/s write.

I was hoping I read speeds were higher than my write as the its more critical for video editing.

Thanks in advance for any help.
robs
 
Posts: 1
Joined: Thu Jan 24, 2013 8:16 pm

Re: Read/write Speeds

Postby jim » Thu Jan 31, 2013 9:08 am

robs,

DAVE supports connection to Microsoft Windows networking, and will only support Mac-to-Mac SMB connection if DAVE is installed on both Macs. Due to the significant differences in protocol, we cannot support connection to Apple's built-in Windows Sharing, Mac Samba implementations, or any other SMB server on OS X.

Please note:
This forum is for user discussion of DAVE, and is not intended as a primary source of technical assistance.
If you require technical support, please contact our Support Specialists at support@thursby.com.


---Jim
jim
Site Admin
 
Posts: 342
Joined: Wed Feb 23, 2011 5:10 pm


Return to Legacy DAVE Versions

Who is online

Users browsing this forum: No registered users and 1 guest